Fascias And Soffits Light Oak |
|
|
|
9mm Light Oak Fascia
9 mm thick x 5 metre's long in light oak from Everwhite Plastics, this fascia is designed to cover timber fascias on your house which are in good condition. Use 40 mm poly top pins to fix.
|
| |
h |
|
|
17mm Light Oak Replacement Board
17 mm thick x 5 metre's from Everwhite Plastics, this light oak fascia needs no backing timber its ideal for replacing rotten fascias or for new build work. Use 65 mm poly top nails to fix.
|
| h |
|
|
|
7mm Flat Boards
5 metre's long Solid flat soffits boards From Everwhite Plastics in a light oak wood grain finish.
|
| Hh |
|
|
|
16mm Bull nosed Light Oak
16 mm thick x 5 metre's long from Everwhite Plastics, this is also a fascia board for replacing rotten wood or new build, it has a bull nosed finish. Use 65 mm poly top nails to fix.
|
| H |
|
|
|
Light Oak Vented Soffit
5 metre's long from Everwhite Plastics two birds with one stone a wood grain soffit board which is cut to provide ventilation to your roof.
|
| H |
|
|
|
Light Oak Shiplap Cladding
5 metre's long 150 mm wide an exterior wood grain cladding.
|
| H |
|
|
|
Poly Top's
Poly Top pins and nails for the above boards.
|
| H |
|
Coloured products must not be stored in direct sunlight or in there wrappers for any length of time good ventilation is required to prevent the boards from warping both during storage and after installation.
A quality light oak finish at affordable prices, allow for expansion and ventilation when fitting light oak. |
|