fascias.com

Flat white topped canopy with a smooth white fascia and a dentil moulding finish with an integral gutter system or supplied as a solid flat top Standard sizes 1.550m and 2.050m x 500mm . Sizes quoted are the external sizes.

Looking from the front select to have a down pipe from the integral guttering on the left or right hand side, or you can have a solid roof with no guttering choose from the options in the drop down box.

Optional Brackets BRG05 can be used with this canopy. 

This canopy is also available made to measure the min order  value  is for 2msq = £489.65 and it is £235 per extra square meter or part metre after that Orders must be placed by fax or by post for all made to measure items.

Many of the GRP door canopies on this site are made to order allow 21 days or delivery.

Please note you must check you canopy for damage before signing for it delivery notes signed unchecked will count as undamaged. All canopy deliveries are insured until you sign for them.

In the event you find damage please mark the delivery note received damaged.

 Our Prices Include VAT

Fitting Instructions for Castledene

With Gutter
1. Find centre of door opening and measure out position for the support brackets, this can vary as long as they fit under the base ends.
2. Fix the brackets level onto the wall using plugs & screws provided.
3. Position Castledene canopy onto brackets and centralise with the door opening, drill through back of canopy upstand and screw back against wall.
4. Screw up through the support brackets into the encapsulated timber in the Castledene canopy. Take care not to drill through into the gutter or use screws that are too long.
5. Fit lead flashing into the next highest mortar line and drape over the back edge of the Castledene. Alternatively, seal against the wall with plenty of silicone sealant.
6. To fit the hopper see below.
7. Your installation is now completed.

Solid Top
1. Follow steps 1 – 3 above.
2. Screw up through the support brackets into the encapsulated timber in the Castledene canopy.
3. Fit lead flashing into the next highest mortar line and drape over the back edge of the Castledene. Alternatively, seal against the wall with plenty of silicone sealant.
4. Your installation is now completed.
Your canopy will give years of maintenance free service and requires only the occasional wash with warm soapy water.
NB Do not use abrasive or solvent cleaners on this product.

Telephone Orders

We are happy to take your order or enquiry by phone

Please call us on 0117 971 9922

We are open 8am - 6pm Monday to Friday & Saturdays 8am - 12pm

© Copyright 1994-2012, Master Plastics (SW) Ltd Bristol | Clevedon. All rights reserved world-wide.

Many of the images on this site do not belong to us. Do not copy or link directly to them. Contact us so we can seek permission where necessary on your behalf.

WE DELIVER UK NATIONWIDE ENGLAND SCOTLAND WALES AND IRELAND..