Trade Roof Dome
trade_dome
Trade Dome
Trade domes are a cost effective quality dome roof light option ideal for a wide range of applications
Factory Engineered Fixing Points
The dome is created using state of the art cutting technology allowing an installer simply to screw the dome to the kerb.
Security Caps - Fixings are secured inside caps which do not open.
Superb Impact Resistance - The polycarbonate dome has an impact resistance almost 200 times that of glass creating a very safe roof light option  
Delivery normally take 4 - 5 working days unless stated
All sizes quoted are internal day light sizes.
Domes and kerbs need to be ordered for a complete kit. Triple skin domes should be used to comply with building regs single and double skins are suitable on sheds and garages
All roof dome are manufactured to order returns are not permitted so please check your sizes before ordering.
!

600mm x 600mm Curved Dome
!
tradecurveddome140a

600mm x 600mm Kerb
TR600X600K
!
roofdomekerba

600mm x 900mm Curved Dome
!
tradecurveddome140a

600mm x 900mm Kerb
TR600X900K
!
roofdomekerba

600mm x 1500mm Curved Dome
!
tradecurveddome140a

600mm x 1500mm Kerb
TR600X1500K
!
roofdomekerba

750mm x 750mm Curved Dome
!
tradecurveddome140a

750mm x 750mm Kerb
TR750X750K
!
roofdomekerba

750mm x 900mm Curved Dome
!
tradecurveddome140a

750mm x 900mm Kerb
TR750X900K
!
roofdomekerba

900mm x 900mm Curved Dome
!
tradecurveddome140a

900mm x 900mm Kerb
TR900X900K
!
roofdomekerba

900mm x 1800mm Curved Dome
!
tradecurveddome140a

This size dome takes 21 - 28 days to deliver.

900mm x 1800mm Kerb
T900X1800K
!
roofdomekerba

1050mm x 1050mm Curved Dome
!
tradecurveddome140a

1050mm x 1050mm Kerb
TR1050X1050K
!
roofdomekerba

1050mm x 1500mm Curved Dome
!
tradecurveddome140a

1050mm x 1500mm Kerb
TR1050X1500K
!
roofdomekerba

1200mm x 600mm Curved Dome
!
tradecurveddome140a

1200mm x 600mm Kerb
TR1200X600K
!
roofdomekerba

1200mm x 900mm Curved Dome
!
tradecurveddome140a

1200mm x 900mm Kerb
TR1200X900K
!
roofdomekerba

1200mm x 1200mm Curved Dome
!
tradecurveddome140a

1200mm x 1200mm Kerb
TR1200X1200K
!
roofdomekerba

1200mm x 1500mm Curved Dome
!
tradecurveddome140a

1200mm x 1500mm Kerb
TR1200X1500K
!
roofdomekerba

1200mm x 1800mm Curved Dome
!
tradecurveddome140a

This size dome takes 21 - 28 days to deliver.

1200mm x 1800mm Kerb
TR1200X1800K
!
roofdomekerba

1200mm x 2400mm Curved Dome
!
tradecurveddome140a

1200mm x 2400mm Kerb
TR1200X2400K
!
roofdomekerba

This size dome takes 21 - 28 days to deliver.

1350mm x 1350mm Curved Dome
!
tradecurveddome140a

1350mm x 1350mm Kerb
TR1350X1350K
!
roofdomekerba

This size dome takes 21 - 28 days to deliver.

1500mm x 1500mm Curved Dome
!
tradecurveddome140a

1500mm x 1500mm Kerb
TR1500X1500K
!
roofdomekerba

1800mm x 1800mm Curved Dome
!
tradecurveddome140a

This size dome takes 21 - 28 days to deliver.

1800mm x 1800mm Kerb
TR1800X1800K
!
roofdomekerba

Hit and Miss Vents
!

If you need vents added to the above domes select the size from the drop down box to add them to your order.

Manual Roof Light Opener
!

Manual Linear Drive use the drop down box for prices

Order with roof lights you must select the same size manual openers as the roof domes ordered. These kits are only designed for our range of domes there are not suitable for any other types of roof. (prices are for openers only they do not include roof domes or kerbs

3.0m handle
OP-POLE3M
!
pole3m
Use with telescopic opener 3.0m long

Electric Roof Light Opener
!

Electric Linear Drive use the drop down box for prices

Order with roof lights you must select the same size electric openers as the roof domes ordered. These kits are only designed for our range of domes there are not suitable for any other types of roof. (prices are for openers only they do not include roof domes or kerbs) prices are for the electic openers only you will also need switches and fuse boxes (control units with rain sensors etc can also be used) we do not supply these parts.
This product should be installed by a qualified electrician 

Electrical Control System For The Powered Opener.
DPCS
!
manualopener_00
Electrical control system with rain sensor and remote control for use with powered roof domes.
Use with powered openers

Full Roof Access Hatch
!
Access Kit use the drop down box for prices

Order with roof lights you must select the same size access kit as the roof domes ordered. These kits are only designed for our range of domes there are not suitable for any other types of roof.light (prices are for openers only they do not include the roof domes or kerbs).

Sorry theses kits are only suitable with the sizes in the drop down box

Installation instructions – Access Hatch

 

Kerb

 

·         Place kerb over roof opening and fix through foot of kerb using the 55mm fixings supplied, making sure the fixings have a secure base

·         A table for the quantity of fixings required per side is shown below:

No. of fixings

Length of side (mm)

2

600 / 750 / 900

3

1050 / 1200

4

1350 / 1500

5

1650 / 1800 / 2400

·         Install roofing membrane as specified in the manufacturer’s instructions. Preferred details for installing the most common roofing types to the mardome kerb are illustrated on the label attached to the kerb

·         For improved weathering, the roof covering cap sheet can be terminated horizontally on the top surface of the kerb. Care must be taken to minimise the build up of material on this surface. It is recommended that the membrane is mitred (rather than lapped) on the top surface at the corners to provide a flat surface for the rooflight to seal to

 

Dome / Pyramid

 

Place the opening dome assembly squarely on the kerb. Holding the dome open to 90° (important - no more than 90°, as overextending the opening can damage the dome), use a powerdriver fitted with the T25 bit supplied to drive the 75mm fixings through the recess in the lower uPVC frame and into the kerb. (If installing to a timber upstand, use the 95mm fixing.) Space the fixings evenly around the frame (max 300mm centres) and ensure they are kept vertical during their installation.

 

Disconnecting the Stays

 

It may be necessary to disconnect the stays in order to gain access for the installation of the fixings on the hinged side of the dome. Rotate the knob and pull it out to release the lower end of the stay. It is important that the dome is then opened no more than 90° as overextending the opening can damage the dome.

Remember the stays must be reconnected once the fixings are in place

Smoke dome 30 degree opening.
!

The smoke roof dome kit converts the kerb and dome into a smoke dome as specified by architects where roof domes are required to meet fire regulations. 

Order with roof lights you must select the same size access kit as the roof domes ordered. These kits are only designed for our range of domes there are not suitable for any other types of roof.light (prices are for openers only they do not include the roof domes or kerbs).

Sorry theses kits are only suitable with the sizes in the drop down box

Roof Lanterns
!

Roof Lanterns - Continuous Rooflights

A range of roof lanterns glazed with glass or polycarbonate which enable the specifier to incorporate a design feature which is truly beneficial to the character value and environment of the building. Each lantern flat roof dome is manufactured to individual project requirements and can be supplied to any length.

 

Roof Domes Circular

!

Circular Roof Domes

Classic circular roof light - u- values of 2.0 w/m2k. - Generous daylight areas.
Superb Impact Resistance - The polycarbonate dome has an impact resistance almost 200 times that of glass creating a very safe roof light option Allow 21 - 28 days for delivery.

 

Flat Roof Stainless Steel Railings
!

** New Flat Roof railings**
 

A range of roof stainless steel railings which enable the specifier to incorporate a design feature which is truly beneficial to the character and environment of the building. Available in four colours with optional lights a simple strong and versatile steel railings system built with stainless steel posts and aluminium rails for a maintenance free finish.

 

Telephone
!

Telephone Orders

We are happy to take your order or enquiry by phone

Please call us on 0117 971 9922

We are open 8am - 5pm Monday to Friday & Saturdays 8am - 12pm

© Copyright 1994-2009, Master Plastics (SW0 Ltd Bristol | Clevedon. All rights reserved world-wide.

Many of the images on this site do not belong to us. Do not copy or link directly to them. Contact us so we can seek permission where necessary on your behalf.

WE DELIVER UK NATIONWIDE ENGLAND SCOTLAND WALES AND IRELAND..