fascias.com

112 mm x 4 m length Square White Gutter

4 m down pipe fits straight onto fittings 4m length

2.5 m down pipe fits straight onto fittings 2.5m length

112mm Running Outlet

White Gutter Brackets (place at max 1 metre centres)

112 mm Gutter Union/Joiner

External Gutter Stop End

Internal Gutter Stop End (only fits in to out lets and unions)

90 Degree Gutte Angle Universal (internal/external)

135 Degree Gutte Angle Universal (internal/external)

StopEnd Outlet Gets Pipe in Close to Wall

Converts plastic 112mm square onto plastic 112 mm round guttering

112mm square to cast iron round universal joiner

68mm down pipe joiner

112 degree off set down pipe bend

68 mm Down pipe clip stand off

68 mm Down pipe branch/tee

68 mm down pipe shoe/spout

92.5 degree off set down pipe bend

When the fascia is tight to the wall you may need a adjustable offset just cut to size

Universal hopper head fits square or round

Converts square down pipes into round holes

A new and innovative two section design of this product allows flexibility where never before thought possible. No more waiting for special angles to be fabricated, and no more hold ups on the job. Flexibility on the shelf and when you want it! Perfect on consevatories and bay windows.

Fills the requirement of 90% of non-standard angles required, Marked in 10º increments. Trim to required angle

Zinc plated box 200

Makes fitting the gutters into the joints very simple. Plus lots of other uses about the house.

Side rafter bracket for use on properties with overhanging tiles and exposed joists

As above except this bracket is nailed to the top f the jost for use on properties with overhanging tiles and exposed joists

Prevents leaves from going down the down pipes

Perfect to help line up your guttering simply double fix a fascia bracket each end and pull the line tight.

Contents include: 13 x HSS titanium drills 1.5-6.5mm; 3 x HSS titanium coated hex shank pilot drills; 4 x wood boring bits 4-8mm; 4 x TCT tipped masonry drills 5-10mm; 5 x flat wood boring drills 13-25mm; 48 x 25mm chrome vanadium driver bits - slotted, phillips, PZD, hex and torx; 18 x 50mm chrome vandium driver bits- slotted, phillips, PZD, hex and torx; 9 x nut drivers 5-13mm; 4 x sanding drums 13-25mm, HSS countersink bit; quick change chuck; bit holder; hole guage; metal ruler.

Suitable for Ogee Square Round and Niagara guttering systems approx 10m per roll available in 117mm for Square Niagara and Round Guttering and 140mm for Ogee guttering  

Prevents blockage from leaves etc.

Easy fixing.

Clips together.

No screws.

Standard brackets for plastic half round guttering

Universal brackets for Niagara Square and Ogee Guttering

Packs include 16 brackets which should be fixed at 600mm centres.

Telephone Orders

We are happy to take your order or enquiry by phone

Please call us on 0117 971 9922

We are open 8am - 5pm Monday to Friday & Saturdays 8am - 12pm

© Copyright 1994-2009, Master Plastics (SW0 Ltd Bristol | Clevedon. All rights reserved world-wide.

Many of the images on this site do not belong to us. Do not copy or link directly to them. Contact us so we can seek permission where necessary on your behalf.

WE DELIVER UK NATIONWIDE ENGLAND SCOTLAND WALES AND IRELAND..