Evolution Canopy System

A brand new design for the domestic canopy.  Made of maintenance free aluminium powder coated finish.  Adaptable for many roof designs and shapes and the strongest canopy system on the market capable of spanning over 4m without further structural supports.

Applications include: car ports , covered seating areas, covered play areas, porches, patio canopy, caravan covers, cycle/smoking shelters.
 
Features of the system include:
Canopy Projections up to and including 4m as standard.
Maintenance free all aluminium construction with powder coated finish.
Integral eaves beam/box gutter with drainage through support posts,
16mm triple wall polycarbonate glazing as standard in either clear, bronze or opal.
Bespoke size options available.
Powder coating available to any RAL no. at extra cost and lead time.
Installation Guide

 

!

Evolution Canopy 1600mm Projection

A high performance canopy system

Applications include: car ports, covered seating areas, covered play areas, porches, patio canopy, caravan cover, cycle/smoking shelters

Features of the canopy system include:
•Maintenance free all aluminium powder coated construction
•Integral eaves beam/box gutter with drainage through supporting posts
•16mm triple wall polycarbonate glazing as standard in either clear, bronze or opal
•Kits are supplied with all fixings and sealants required for installation

Posts:

2.25m as standard

2 x posts = 2.5m - 3.5m

3 x posts = 4.0m - 7.0m

3m posts available - order below

Installation Guide


 

Technical Information

 

 

Wall Plate

115mm High

70mm Wide

Eaves Beam

115mm High

80mm Wide

Edge Bars

80mm High

30mm Wide

Main Bars

60mm + Top Cap 3mm High

50mm Wide

Posts

75mm x 75mm

 

The Evolution canopy can be made in any size, and also free-standing, call for a quote.

All canopies are set at 5° pitch as standard. If you require a different pitch please state when ordering.

The evolution canopy is also available on most RAL colours, call for a quote
 

Evolution Canopy 2100mm Projection

A high performance canopy system

Applications include: car ports, covered seating areas, covered play areas, porches, patio canopy, caravan cover, cycle/smoking shelters

Features of the canopy system include:
•Maintenance free all aluminium powder coated construction
•Integral eaves beam/box gutter with drainage through supporting posts
•16mm triple wall polycarbonate glazing as standard in either clear, bronze or opal
•Kits are supplied with all fixings and sealants required for installation

Posts:

2.25m as standard

2 x posts = 2.5m - 3.5m

3 x posts = 4.0m - 7.0m

3m posts available - order below

Installation Guide

 

Technical Information

Wall Plate

115mm High

70mm Wide

Eaves Beam

115mm High

80mm Wide

Edge Bars

80mm High

30mm Wide

Main Bars

60mm + Top Cap 3mm High

50mm Wide

Posts

75mm x 75mm

The Evolution canopy can be made in any size, and also free-standing, call for a quote.

All canopies are set at 5° pitch as standard. If you require a different pitch please state when ordering.

The evolution canopy is also available on most RAL colours, call for a quote

 

Evolution Canopy 2600mm Projection

A high performance canopy system

Applications include: car ports, covered seating areas, covered play areas, porches, patio canopy, caravan cover, cycle/smoking shelters

Features of the canopy system include:
•Maintenance free all aluminium powder coated construction
•Integral eaves beam/box gutter with drainage through supporting posts
•16mm triple wall polycarbonate glazing as standard in either clear, bronze or opal
•Kits are supplied with all fixings and sealants required for installation

Posts:

2.25m as standard

2 x posts = 2.5m - 3.5m

3 x posts = 4.0m - 7.0m

3m posts available - order below

Installation Guide

Technical Information

Wall Plate

115mm High

70mm Wide

Eaves Beam

115mm High

80mm Wide

Edge Bars

80mm High

30mm Wide

Main Bars

60mm + Top Cap 3mm High

50mm Wide

Posts

75mm x 75mm

The Evolution canopy can be made in any size, and also free-standing, call for a quote.

All canopies are set at 5° pitch as standard. If you require a different pitch please state when ordering.

The evolution canopy is also available on most RAL colours, call for a quote

 

Evolution Canopy 3100mm Projection

A high performance canopy system

Applications include: car ports, covered seating areas, covered play areas, porches, patio canopy, caravan cover, cycle/smoking shelters

Features of the canopy system include:
•Maintenance free all aluminium powder coated construction
•Integral eaves beam/box gutter with drainage through supporting posts
•16mm triple wall polycarbonate glazing as standard in either clear, bronze or opal
•Kits are supplied with all fixings and sealants required for installation

Posts:

2.25m as standard

2 x posts = 2.5m - 3.5m

3 x posts = 4.0m - 7.0m

3m posts available - order below

Installation Guide

Technical Information

Wall Plate

115mm High

70mm Wide

Eaves Beam

115mm High

80mm Wide

Edge Bars

80mm High

30mm Wide

Main Bars

60mm + Top Cap 3mm High

50mm Wide

Posts

75mm x 75mm

The Evolution canopy can be made in any size, and also free-standing, call for a quote.

All canopies are set at 5° pitch as standard. If you require a different pitch please state when ordering.

The evolution canopy is also available on most RAL colours, call for a quote

 

Evolution Canopy 3600mm Projection

A high performance canopy system

Applications include: car ports, covered seating areas, covered play areas, porches, patio canopy, caravan cover, cycle/smoking shelters

Features of the canopy system include:
•Maintenance free all aluminium powder coated construction
•Integral eaves beam/box gutter with drainage through supporting posts
•16mm triple wall polycarbonate glazing as standard in either clear, bronze or opal
•Kits are supplied with all fixings and sealants required for installation

Posts:

2.25m as standard

2 x posts = 2.5m - 3.5m

3 x posts = 4.0m - 7.0m

3m posts available - order below

Installation Guide

Technical Information

Wall Plate

115mm High

70mm Wide

Eaves Beam

115mm High

80mm Wide

Edge Bars

80mm High

30mm Wide

Main Bars

60mm + Top Cap 3mm High

50mm Wide

Posts

75mm x 75mm

The Evolution canopy can be made in any size, and also free-standing, call for a quote.

All canopies are set at 5° pitch as standard. If you require a different pitch please state when ordering.

The evolution canopy is also available on most RAL colours, call for a quote


 

Evolution Canopy 4100mm Projection

A high performance canopy system

Applications include: car ports, covered seating areas, covered play areas, porches, patio canopy, caravan cover, cycle/smoking shelters

Features of the canopy system include:
•Maintenance free all aluminium powder coated construction
•Integral eaves beam/box gutter with drainage through supporting posts
•16mm triple wall polycarbonate glazing as standard in either clear, bronze or opal
•Kits are supplied with all fixings and sealants required for installation

Posts:

2.25m as standard

2 x posts = 2.5m - 3.5m

3 x posts = 4.0m - 7.0m

3m posts available - order below

Installation Guide

Technical Information

Wall Plate

115mm High

70mm Wide

Eaves Beam

115mm High

80mm Wide

Edge Bars

80mm High

30mm Wide

Main Bars

60mm + Top Cap 3mm High

50mm Wide

Posts

75mm x 75mm

The Evolution canopy can be made in any size, and also free-standing, call for a quote.

All canopies are set at 5° pitch as standard. If you require a different pitch please state when ordering.

The evolution canopy is also available on most RAL colours, call for a quote


 

Evolution Canopy 3m Post Upgrade

Upgrade your post to 3m for the evolution canopy system

Post upgrade sold with Evolution Canopy System

for width 2.5m - 3.5m order 2 posts

for width 4.0m - 7.0m order 3 posts

 

Technical Information

Wall Plate

115mm High

70mm Wide

Eaves Beam

115mm High

80mm Wide

Edge Bars

80mm High

30mm Wide

Main Bars

60mm + Top Cap 3mm High

50mm Wide

Posts

75mm x 75mm

The Evolution canopy can be made in any size, and also free-standing, call for a quote.

All canopies are set at 5° pitch as standard. If you require a different pitch please state when ordering.

The evolution canopy is also available on most RAL colours, call for a quote

More Information

Evolution

 

 

The High Performance Canopy System
The Evolution Canopy is an exciting new system, encompassing a modern design with clean sight lines providing ease of installation. In addition, its high structural performance ensures this system is an ideal choice for domestic, DIY and commercial applications.
This highly versatile system offers a solution for many applications such as:
• car ports
• covered seating areas
• covered play areas
• porches
• patio canopies
• caravan shelters
• cycle shelters
• smoking shelters
• walk way covers

The system can be supplied in modular kit format (please see size matrix) as well as bespoke sizes and configurations.

Standard Size Matrix

WIDTHS 2.5m 3m 3.5m 4m 4.5m 5m 6m 4.5m 7m
PROJECTIONS 1600mm 2100mm 2600mm 3100mm 3600mm 4100mm      


For specific non-standard projections please contact us for technical support.
The kits are supplied with all the fixings and sealants required for a standard installation and also includes a comprehensive fitting guide.

 



System Features
• The system is manufactured in maintenance free powder coated aluminium in white as standard with any RAL no. colour available at extra cost and lead time.


• The canopy is glazed with 16mm triple wall UV stabilised polycarbonate sheeting offering greater flexibility in canopy design with enhanced strength and rigidity, available in clear, bronze or opal tints.


• The standard canopy range is available on a 5 working day lead time.


• The eaves beam cleverly double’s as an integral box gutter utilising the support posts as down pipes with the rain water exiting through the variable height post feet.


• The system can accommodate pitches from 5 degrees to 20 degrees, on standard modular kits the maximum projection is achieved at a pitch of 5 degrees.


• As well as the standard lean too configuration the system can be specified as a gable roof design with the wall plates bolted back to back to form a ridge supported between two host walls or as a fee standing option supported on posts.