Our roof lanterns come complete with Low e toughened argon filled glass in the roof and sides as standard, or you can choose to upgrade the roof glass to Self Cleaning or Blue Tint Glass in either double or triple glazed.
70mm profile windows (optional opening windows)
Guttering - Hunter Regency gutter.
The industry preferred bar system, which extends its life and makes installation a breeze.
A choice of profile and roof bar colours - White, Rosewood, Mahogany or Light Oak.
Aluminium roof bars in Light Oak, Mahogany or Rosewood
Optional Crestings & Finials
Sizes are internal frame sizes the profiles are 70mm so the external frame size is + 140mm.
The actual cill is 160mm wide so the external cill size is plus + 320mm.
For More Information - Click Here
Installation Guide - Click Here
2.0m wide x 1.0m projection Lean To Porch. With full height, fully glazed panels.
As standard you will receive a variable pitch roof to support polycarbonate or glass. 150mm wide cill. Quality door furniture including hinges, lever/lever door handle, lock & key. (Letter box can not be fitted to this porch)
Low-e toughened, A Rated argon filled with warm edge spacer bar double glazed units. Front frame height up to eaves beam 2100mm. Frame height up to wall plate 2400mm This excludes the roof.
Start with the cill which is over sized use a straight edge and a level against your house wall over the total height to work out how much cill to cut off. ( or the none technical way is to put the cill in place then use a frame push it to the wall check its level then measure in from the bottom of the frame to wall then cut the cill to size).
Once you're happy with the size of the cill fix down through it in to the brick work or blocks below. (you can either pack the cill so that the top edge is level or bed in on cement) You will need to buy a suitable fixings depending on what sort of base you have.
With timber bases use a size 10 screw if you have blocks bricks or concrete use nylon frame anchors size 8 x 100mm you will need 6 for the base and another 6 x 120mm long for the frames.
Once the cill is fixed you then stand the frames on the cill where two frames come together you will have a h section trim this bangs on to the first frame then second frame then fits in to it.Use self tapping screws to join the frames to each other and to the corner posts. Check the door will open as they some times have transit screws added to them.
Screw all the frames together before fixing them to the wall or cill this will allow you to move it about until you're happy its in the right place. The door needs to be square.
Once you are happy screw it to the cill and fix it to the wall. Put you're fixings were the glass will be going in this will hide them when the job is finished.
Now add the three roof bars bolt them into place add the polycarbonate sheets and top caps finish the flashing so the roof is completely done.
That now leaves the glazing put the glass into place then fix the glazing beads. It can save some time if you give everything a good clean before adding the glazing.
Description: Made-to-measure Four panelled bi-fold folding sliding door.
This door is one folding unit, there is no main opening sash.
Using 70mm sculptured profile internally beaded, with an A Rating and 5 point locking system
Dimensions: The Four panelled folding door will suit openings from 2120mm to 4120mm width, with a maximum height of 2320mm. Please enter your opening sizes in the box's on the right
Glass: 28mm thick 4-20-4 Clear Low-e toughened argon filled A Rated with warm edge spacer bar.
Opening Direction: Looking at the door from outside the house, do you want it hinged on the left or the right
Internal or external folding: Select if you'd like your door to folding internally or externally
Hardware: This door is supplied with white door furniture as standard, you can upgrade to Black, Chrome or Brass from the options on the right.
Frame Colour: This door comes as white as standard you can upgrade to another colour in our range. Golden Oak or Rosewood.
RAL Colours are available: Please call for prices and availability
Threshold: This door comes with standard threshold, you can upgrade to Low Aluminium Threshold in the options on the right
Bi-Fold Installation Guide - Click Here
Description: 3 inch economy profile 6 foot (1.830m) Sheet. General purpose PVC sheeting for roofing and cladding. Applications: porches, car ports, canopies, rooflights, planthouses, side cladding, covered walkways, garden sheds, lean-to extensions.
10 Year Manufacturer's Guarantee
High Light Transmission
Dimensions: Covers 28 1/2 inches (723 mm) Clear Sheet Actual size 30 inches (760mm) x 0.8mm thick
Notes: Minimum order is 10 sheets
Description: 16 mm Polycarbonate Sheet. Triple Wall Clear.
Use: Polycarbonate insulating roofing sheets for installations where the maximum light transmission is required.
Applications: conservatories, rooflight features, car ports, extensions, swimming pool covers, porches, glazing.
Dimensions: 700mm x 2000 x 16mm
Also available: in 10mm Triple Wall, 25mm Five Wall & 35mm Five Wall Sheets
The White 9mm Cover Board is also known as uPVC Cap-over fascias, or cappit board. Typically used to cover existing timber fascias or bargeboards which are in good sound condition and replacement uPVC fascia installations where timber or plywood backing boards are used. These 9mm Cover boards are 5m in length.
Standard 9mm Reveal Liner Fascia Cover Board
Plastic fascia to go on to timber.
Dimensions: 9mm x 100mm x 5m
Colour : White
Material : Plastic
Properties: One wing door: Can be fitted to open left to right or right to left only.
Measurements : 203 x 88 cm
Extension Panel: No - This door can not be extended
Folding door height can be reduced/cut on site. Doors are pre-manufactured at 203cm heights only.
When fully open the door is 160mm wide with a panel depth of 100mm
For any technical questions please call 0117 971 9922